fbpx

SIRIO 315 SH

IMET SIRIO 315 SH Heavy duty semiautomatic vertical saw

Heavy duty semiautomatic vertical saw; mitre cutting from 0° to 45° right and from 0° to 60° left.

  • Suited to cut high-resistance steel. Blade spindle with 40 mm diameter.
  • Semiautomatic version with electro-pneumatic functioning, hydraulic control of the down-feed speed of the head and pneumatic vice. Cutting cycles with adjustable feed speed during cut and fast return.
  • Easy regulation of cut start/stop positions by 2 microswitch.
  • Vice with adjustable guides, free to move alongside the worktable, with quick motion and clamping, anti-burr adjustable device.
  • Gears with oil, endless screw and bronze crown gear. Easy stops at 0° and 45° left, adjustable length stop.
    Floor stand with removable chip collector and coolant tank; coolant electro-pump.
    Cutting capacity at 90 °, round till 108 mm., square till 93 mm., rectangular till 150 x 90 mm.





    SIRIO quick vice lever

    All circular saws mod. SIRIO have as standard transverse displacementof of the pneumatic front vice.

    SIRIO blade cleaning brush

    On all SIRIO models, nylon brushes are mounted to avoid damaging the cutting edge of the blade and to keep it always clean

    Minimal lubrication system OPTIONAL

    It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.

    Foot Pedal Control OPTIONAL

    Upon request for semi-automatic sawing machines a foot pedal control is available.

     

    Roller tables RTS

    Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

    Roller Tables RTM

    Same structures of the RTS roller tables, to be used on the unloading side with length stop and metric rod for the reading of the length, mechanical block in position by handle.

    Roller Tables RTD

    Roller tables with free rolls and length stop through a hand-wheel with chain transmission and reading of the measure through LCD display. Automatic and pneumatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control. Turnover of the length stop with a button on the control, through pneumatic piston. Block in position is also pneumatic through a button.

    Roller tables RTP BS.

    Roller tables with free rolls, length stop and motorized movement with possibility to plan 10 different lengths through PLC. Movement through toothed belt and geared motor on balls recirculation guides . Length stop through pneumatic cylinder. Reading of the position through encoder and rack. Available in forms from 3 meters. Automatic withdrawal of 50 mm to facilitate unloading of the cut piece, return in position through a button on the control.

    SIRIO 315 SH
    Area angular cut ° -45 / 90 / 30
    Cutting capacity at 90°: round / square / rectangular mm. 108 / 93 / 150 x 90
    Blade dimensions mm. 315
    Blade Motor Power KW 1.5 / 1.8
    Blade speed RPM 17/33 or 33/66
    Capacity coolant tank Lt 40
    Dimensions ( B x L x H ) mm. 800 x 900 x 1950
    Height of the work-table mm. 925
    Weight Kg 360
    Type of functioning Semiautomatic pneumatic
    Suitable for cutting: Steel / cast iron / high-strength steels

    Liitu nordcity.ee uudiskirjaga, et olla kursis meie värskete uudiste ja parimate pakkumistega!