fbpx

VELOX 350 AF-E

IMET VELOX 350 AF-E Automatic circular saw

Automatic circular saw suited to cut aluminum, light metal solids, and profiles with high accuracy. Possibility to set the machine for brass and copper profiles. Mitre cutting from 0° to 45° left and right. (02.) The head bends 45° on the vertical axis to allow inclined cuts.





    Easy stops at 0°, 15°, 30°, 45° left and right.

    Hand-wheel to lock the head on all angles.

    Graduation engraved on the worktable.

    Electro-pneumatic functioning, hydraulic control of the down-feed speed of the head.

    Electronic driver with the programming of all operations by means of the keyboard, including setting the start-cut and end-cut points.

    Machine status is shown on display, including blade life and speed, piece counter, cycle time, motor absorption; and working anomalies.

    After setting the cutting length and the number of cuts, a trim cut is performed, then the bar is cut till the end of the program.

    Manual selection of the cutting length with digital reading and decimal nonius.

    Pair of front pneumatic vices with quick clamping, free to move alongside the worktable, vertical pneumatic vice.

    Upper roller to cut more bars in a row.  Complete blade protection, able to connect chip suction plant.

    Complete guard opens only when the blade is still. Fixed protection on the unloading side.

    Floor stand with removable tank and chip collector, connection element to the unloading side grants maximum safety protection.

    Lubrication system with spray working only during the cut, air filter/reducer/lubrication group.

    Main switch with minimum tension coil, emergency button, thermic and magnetic motor protection, motor absorption device, 24V low tension.

    A feeder with a 200 mm opening, maximum stroke 520 mm, minimum stroke 4 mm (minimum scrap-end 355 mm); selection of the number of cuts (1-9999) and the feeder strokes (1-29) by means of the keyboard.

    Cast iron head avoids vibrations. Additional vertical pneumatic vice guarantees perfect material locking.

    Cutting capacity at 90° round till 120 mm., square till 105 mm. 200×80 mm.

    Tron interior photo

    The PLC TRON controls all operational functions of the saw and provides information about the operating conditions of the machine (cutting time, blade speed, blade life, number of cuts made), complete with self-diagnostics for quick resolution of any problems encountered.

    Vertical Cut VELOX

    The Velox circular Saws , in addition to the standard horizontal inclination from -45 ° to +45° have also the possibility to tilt the head vertically to 45 ° left.

    Velox V-Jaws

    With the application of the aluminum V-Jaws it is possible to cut a bundle of tubes, maximum diameter 85 mm.; provided with asssembling kit.

    Chips Aspirator Velox OPTIONAL

    Upon request a chips aspirator can be supplied to abate most of the chips produced during the cutting phase.

     

    Roller tables RTS

    Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

    V- Rollers

    If the V-jaws are required , it is advisable to apply on the roller table a pair of V-rollers , we suggest 6 pairs maximum every 2 meters of roller table.

     

    VELOX 350 AF-E
    Area angular cut ° -45/90/+45
    Cutting capacity at 90°: round / square / rectangular mm. 120 / 105 / 200×80
    Blade dimensions mm. 350
    Blade Motor Power KW 2.2
    Run feeder carriage (repeatable) mm. 520
    Scrap end mm. 355
    Blade speed RPM 3600
    Capacity coolant tank Lt 40
    Dimensions ( B x L x H ) mm. 1800x13oox1800
    Height of the work-table mm. 930
    Weight Kg 590
    Minimum cuttable length mm. 4
    Type of fucntioning semiautomatic/automatic CNC
    Suitable for cutting: Aluminium and light alloys

    Liitu nordcity.ee uudiskirjaga, et olla kursis meie värskete uudiste ja parimate pakkumistega!