(

H 601 AF NC INDUSTRY READY

IMET H 601 AF-NC INDUSTRY 4.0 READY* Automatic CNC twin column bandsaw

Automatic CNC twin column bandsaw with the possibility to memorize up to 99 different cutting programs with different cutting lengths on the same bar.
The machine has the possibilty to manage all the operative conditions (like the band speed, total number of cut pieces) on its touch screeen display. Thanks to the CNC and touch screen display is also possibile to set the cutting lengths and quantity with automatic repetition. The machine can be managed remotely thanks to the Industry 4.0 Ready setting.
Feeder 550mm long (available also 1500mm) with electric movement through recirculation ballscrews with 32mm diameter onto linear guides.
Steel sawframe with tubular section; working area supporter by a central pivot with preloaded bearings. Sawframe movement onto an electrowelded big size column, through two recirculating.
520mm diameter pulleys and long-life monoblock motoreductor.
Electronic inverter for variable blade speed
Registrable band guides with hard metal pads and guided bearings.
Pattini guidalama registrabili con inserti in metallo duro e cuscinetti di invito.
Automatic control of the beginning and end cut through a feeler pin; regulation of the descent of the arc and strength of the penetration through touch screen display.
Sawframe canted 6° allows sawblade to freely and easily cut through the bottom of structural section without vibration, binding or slowdown os sawing rates.
90° cutting capacity is 510mm round, 480mm squared, rectangular 610x450mm.
*The modem for Industry 4.0, teleservice and remote control is supplied as an optional.





     

    Minimal lubrication system OPTIONAL

    It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.

    Scale H 601

    On the saws H 601 the reading of the cutting is done through graduations easy to read positioned in front of the machine.

     

    Pulleys H 601

    The H 601 saws have cast iron big pulleys to avoid excessive strain of the blade.

    Control panel H 601 NC

    The numerical control of the sawing machine H 601 AF-NC is mounted on a mobile console for an easy positioning by the operator

    Screw feeder

    In all our automatic NC Bandsaws the movement of the feeder is via a recirculating ballscrew and gear motor controlled by an inverter.

    Digital Reader H 601 OPTIONAL

    On request a digital reader of the angle of the cut is available, with large LCD screen.

     

     

    Roller tables KS

    Roller tables with free rolls to be used both on loading side and unloading side , with electrowelded steel structure, element of 1,5 meters, support pads and a pedestal. Fitted for the ground fixing and with possibility of regulation of the height

    Vertical Rollers RTSKS

    In case that your sawing machine mounts the bundle cutting device, it is advisable to request some vertical containment rollers for the material to be cut.

    H 601 AF-NC
    Area angular cut°90 +30
    Cutting capacity at 90°: round / square / rectangularmm.510 / 480 / 610 x 450
    Cutting capacity at 90°: rectangular with cutting bundlemm.max 600 x 250 min 150 x 50
    Blade dimensionsmm.5320 x 34 x 1.1 or 5320 x 41 x 1.3 on request
    Blade Motor PowerKW3 or 4 on request
    Run feeder carriage (repeatable)mm.550 / optional 1500
    Power motor feederKW0.75
    Scrap endmm.100
    Blade speedmt/min.15 ÷ 100
    Motor hydraulic unitKW0.75
    Tank Capacity of the hydraulic unitLt20
    Capacity coolant tankLt100
    Dimensions ( B x L x H )mm.2650 x 2800 x 2170
    Height of the work-tablemm.820
    WeightKg2300
    Minimum cuttable lengthmm.30
    Type of functioningsemiautomatic/automatic CNC
    Suitable for cutting:Steel / cast iron / high-strength steels