(

RPC 1200

HGG Beam Cutting Machine RPC 1200

The RPC 1200 Beam Cutting Machine is a plasma cutting machine and the most advanced and productive one on the market today. The RPC sets a new standard by offering an entire fab shop in a single machine.

Include Edge Breaking

Next to the cutting an Edge Rounding Line can be used in tandem with the RPC, providing 2 mm radii to all edges. This eliminates the need for tedious and time consuming grinding work.

Parts that Fit

Materials have various deformations: angled flanges, non-straight surfaces and varying radii. The RPC uses a triangulation scan of the actual material and corrects it before the cutting. This results in unparalleled processing speeds along with accurate cut results.

Free form

It is difficult to predict all fabrication work for years in advance. That’s why the RPC 1200 is equipped with a free form module, which identifies colliding members and their individual contact points. It then compiles them into shapes ready to be cut by the robot.





What is your greatest worry in a fabrication process? Is it the complexity of the design, poor production flow management, inefficient material handling with too much material waste, loss of control over the operating expenses, or the lack of highly skilled welders? Then, how do you deal with the increasingly tough demands and regulations on welded structural design?

Offshore

For traditional H-beam coping, profilers use oxy fuel cutting while still requiring grind work. The RPC 1200 is a high performance beam cutting machine that easily reduces processing time by 30%, while reducing grinding after cutting as well. The RPC beam cutting machine was developed to cut 100% of the common offshore cuts, including rat holes, which gives 100% freedom to design project specific connections.

Industry application: H-beam coping for top sides, living quarters, subsea structures, subsea frames, support structures, pipe racks, protection frames for subsea manifolds

Steel Construction

With the RPC 1200 beam cutting machine, you have an entire fabrication shop in a single machine. It’s been developed to replace multiple traditional lines, such as beam drill, band saw, angle line and marking line. The RPC 1200 is a high performance plasma beam cutting machine that reduces processing time by 30%, while also only requiring 20% of the original floor space. With our Perfect Hole™ technology, you can cut now accurate bolt holes.

Industry application: H-beam coping for building structures, bridges, railroad, trailers, train wagons, mining, raw material conveyor structures

Onshore Process

For traditional H-beam coping, profilers use oxy fuel cutting while still requiring grind work. The RPC 1200 is a high performance plasma beam cutting machine that reduces processing time by 30%, while reducing grinding after cutting as well. In this industry, the RPC 1200 beam cutting machine is typically used for profiling flush beam connections for the fabrication of skids and profiling of box sections for subsea structure and support frames.

Industry application: H-beam coping for skids, subsea structure and support frames.

RPC

1200

100x100mm – 600x400mm (3.9×3.9″ – 23.6×15.7″)100x50mm – 1100x400mm (3.9×2″ – 43.3×15.7″)620x430mm – 1220x430mm (3.7×1″ – 48×16.9″)95x55mm – 1220x430mm (3.7×2.2″ – 48×16.9″)100x50mm – 1100x400mm (3.9×2″ – 43.3×15.7″)75x75mm – 550x550mm (3×3″ – 21.7×21.7″)12t

Here is a selection of profiling shapes for realizing connections on an H-beam, angle bar equal, T-bar, channel, angle bar unequal and box section.

Beam end cuts

To connect a beam to an intersecting beam or a node

Beam cut-outs

To make room for colliding parts

Beam holes

To cut bolted holes