KL 285

KOVOSVIT KL 285 Turning machining centre

Main features of the machine.
Bed structure – 60° from horizontal surface.
Electrical spindle A6 (Siemens).
Tool head (SAUTER VDI 40).
Linear guide (Schneeberger size 35).
Ball screws (NSK) – with nut cooling capability.
Hydraulic cylinder of the tailstock with admeasuring – setting the pressure on the control panel.
Possibility of using a ball screw with the tailstock – by reason of minimum clamping force.
Components spreading heat and noise placed in the rear of the machine.
Hydraulic unit with proportional valves – setting the pressure on the control panel.
Setting the position of the chuck jaws on the control panel.
Ball screw drives without a gear (motor, clutch, ball screw), ball screws used with lower pitch by reason of securing higher positioning precision.

    Direct measurement in X1 axis
    Manual airblast
    Chucks A6 – KNCS-N
    Tool measuring probe
    Tool measuring probe – motorised
    Tailstock with rotary bushing (tip Mo4)
    Fixed centre Mo4
    Automatic electric sliding of the working space cover
    KL285 Super Precision
    Chip conveyor – outlet in the rear of the machine
    Tool head BMT 55
    Tool head Direct drive (12,000 rpm) – VDI 30
    Tailstock ball screw
    Unit with frequency converter
    Rotary tip of the tailstock Mo5

    Technical specifications
    Working space Swing diameter over bed mm 670
    Swing diameter above the slide rest mm 410
    Max. turning diameter mm 340*
    Standard turning diameter * mm 285
    Max. turning length mm 550
    Max. passage through main spindle mm 65
    Stroke in axis X mm 243
    Stroke in axis Z mm 610
    Axes High-speed travels X and Z m/min 30
    Main spindle Spindle termination A6
    Max. revolutions min-1 min-1 5,000
    Torque moment S1 / S6 – 40% Nm 200/257
    Output S1/S6-40% kW 21/27
    Tool Head Number of positions 12
    Hole diameter VDI mm 40
    Max. speed on the tool spindle min-1 min-1 4500
    Max. torque S1/S3-40% Nm Nm 16/21
    Output S1/S3-40% kW 30.4/3.3
    Tailstock Bore cone – MORSE M0 5
    Dimensions L / W / H mm 2,755 x 1,752 x 1,900
    Machine weight kg 5900
    * Standard cutter holder, external cutter ejected by 40 mm.

    Liitu nordcity.ee uudiskirjaga, et olla kursis meie värskete uudiste ja parimate pakkumistega!