KTECH 1202 F 3000-6000 INDUSTRY 4.0 READY *
Fully automatic twin column bandsaw
Automatic upright band sawing machines, suitable for cutting medium and large profiles and solid, equipped with numerical control for motorized rotation from 60 ° right to 60 ° left and programming length of the feed carriage.
The arc in electro-welded steel with a thick section guarantees the absolute lack of vibrations.
The bow movement is perfectly balanced and guaranteed by the large diameter hydraulic cylinder.
The numeric control allows you to set and store over 90 different cutting programs, with different quantities, lengths and angles.
Programming keyboard integrated with CNC, positioned on a mobile console, LCD display for displaying work phases and self-diagnostics.
The rotation of the arc takes place on large preloaded bearings through gearmotor and self-braking motor with encoder for reading the position. The automatic locking of the arc rotation is hydraulic.
Vertical hydraulic presser to optimize material locking and avoid vibrations during cutting (Optional).
Blade refrigeration with minimal standard lubrication, to perform cuts on sections and tubes without the inconvenience of dispersion of the traditional liquid typical of cuts on relevant lengths.
Standard energy-saving hydraulic control unit, during the execution of the cut and in the phases in which no hydraulic pressure is required, the control unit switches off, thus guaranteeing considerable energy savings.
90 ° cut: 520 mm round, 450 mm square, 680 x 400 rectangle
* Industry 4.0 system with modem for teleservice and remote management is available as an option.
|KTECH 1202 F 3000-6000 INDUSTRY 4.0 READY*|
|Area angular cut||°||-30 / 90 / +30|
|Cutting capacity at 90°: round / square / rectangular||mm.||680 / 640 / 1250 x 600|
|Cutting capacity at 90°: rectangular with cutting bundle||mm.||800 x 350|
|Blade dimensions||mm.||8140 x 54 x 1.6|
|Inclination of the blade||°||6|
|Blade Motor Power||KW||5.5|
|Run of feeder carriage (repeatable)||mm.||3000 – 6000|
|Feeder motor power||KW||1.5|
|Motor hydraulic unit||KW||1.5|
|Tank Capacity of the hydraulic unit||Lt||80|
|Capacity coolant tank||Lt||3|
|Dimensions ( B x L x H )||mm.||5750 x 4200 x 2750 ( F3000 )|
|Height of the work-table||mm.||850|
|Weight||Kg||5300 ( F3000 )|
|Minimum cuttable length||mm.||30|
|Type of functioning||semiautomatic/automatic CNC|
|Suitable for cutting :||Steels / cast iron / high-strength steels / alloys|