CUBO 300-NC FLAT CNC automatic bandsaw
CNC automatic bandsaw,hydraulically driven. Mitre cutting from 0° to 45° left in automatic cycle and from 0° to 60° left in semiautomatic cycle. CUBO 300-NC-FLAT is an Industry 4.0 tool and has the possibility to use it remotely.
Easy stops at 0°, graduated plate to identify different angles.
High blade tensioning 1700 kg / cm² to increase cutting accuracy and reduce cutting time.
Up to 99 different cutting lengths and number of cuts can be memorized, with the possibility to repeat them more than once.
CNC with programming of all operations; automatic calculation of the blade thickness.
Machine status shown on display, including blade speed, piece counter, and working anomalies. setting of the cutting lengths, minimal scrap-end 210 mm. Connection for loading table with 2 vertical rollers, unloading slide, connection for unloading table for cutting pieces.
Main switch with minimum tension coil, emergency button, thermic and magnetic motor protection.
Cutting capacity : round till 255 mm., square till 240 mm. and rectangular till 300×180 mm.
*The modem for Industry 4.0, teleservice and remote control is supplied as an optional
|Area angular cut||°||90 +30|
|Cutting capacity at 90°: round / square / rectangular||mm.||255 / 230 / 300 x 180|
|Blade dimensions||mm.||2765 x 27 x 0.9|
|Motor Blade Power||KW||1.5|
|Run feeder carriage (repeatable)||mm.||515|
|Feeder motor power||KW||0.75|
|Blade speed||mt/min.||18 ÷ 110|
|Motor Hydraulic Unit||KW||0.75|
|Tank Capacity of the hydraulic unit||Lt||20|
|Capacity coolant Tank||Lt||100|
|Dimensions ( B x L x H )||mm.||1800 x 1850 x 1880|
|Height of the work-table||mm.||870|
|Minimum cuttable length||mm.||4|
|Type of functioning||semiautomatic/automatic|
|Suitable for cutting.||Steel / cast iron / high-strength steels|