fbpx

GBS 240 GH AUTOCUT

IMET GBS 240 GH Autocut bandsaw

Bandsaw with gravity lowering suitable for the maintenance and for small productions of section bars, tubes, and solids up to 60° left.

Vice with quick clamping. Easy stops at 0°, 45° and 60° left, graduated plate to identify different angles.
Band guides with bearings for blade alignment,pulleys with 260 mm diameter.
AUTOCUT GH Version with “3 Ways” Selector:
– A Manual cut.
– B Manual cut with self-brake.
– C Automatic cut with adjustable down-feed rate and stop at the end of the cut. The user can move manually the sawframe close to the material,then let the machine make the cut adjusting only the down-feed rate.
Cutting capacity at 90° round till 240 mm., square till 230 mm. and rectangular till 270×230 mm.





    Blade guides with hard metal pads

    Blade guides with hard metal pads with adjusting screws to compensate the wear and tear.

     

    Roller tables RTS

    Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

    Roller Tables RTM

    Same structures of the RTS roller tables, to be used on the unloading side with length stop and metric rod for the reading of the length, mechanical block in position by handle.

    Roller Tables RTD

    Roller tables with free rolls and length stop through a hand-wheel with chain transmission and reading of the measure through LCD display. Automatic and pneumatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control. Turnover of the length stop with a button on the control, through pneumatic piston. Block in position is also pneumatic through a button.

    Roller tables RTP BS.

    Roller tables with free rolls, length stop and motorized movement with possibility to plan 10 different lengths through PLC. Movement through toothed belt and geared motor on balls recirculation guides . Length stop through pneumatic cylinder. Reading of the position through encoder and rack. Available in forms from 3 meters. Automatic withdrawal of 50 mm to facilitate unloading of the cut piece, return in position through a button on the control.

    GBS 240 GH Autocut
    Area angular cut ° 90 + 30
    Cutting capacity at 90°: round / square / rectangular mm. 240 / 230 / 270 x 230
    Blade dimensions mm.   2730 x 27 x 0.9
    Blade Motor Power KW 1,2
    Blade speed mt/min. 35/70
    Dimensions ( B x L x H ) mm. 680 x 1400 x 1800
    Height of Work-table mm. 900
    Weight Kg 260
    Type of functioning Manual/Gravity
    Suitable for cutting: Steel / cast iron

    Liitu nordcity.ee uudiskirjaga, et olla kursis meie värskete uudiste ja parimate pakkumistega!