fbpx

GBS 185

IMET GBS 185 Manual bandsaw

Manual bandsaw or with gravity lowering mitre cutting from 0° to 60° left.
Vice with quick clamping. Easy stops at 0°, 45° and 60° left, graduated plate to identify different angles.
Adjustment of the blade tension from the front side of the sawframe, checked by an end-stroke. Band guides with bearings for blade alignment, pulleys with 260 mm diameter.
Start-button inside the handle.
Floor stand with door and room inside.
Cast iron sawframe inclined to 42°, in order not to strain excessively the blade.
High tension blade 1000 kg/cm², through front screw, which allows a greater cutting accuracy and a bigger execution speed.
Cutting capacity at 90° round till 185 mm., square till 180 mm. and rectangular till 200 x 150 mm.





    Blade guides with hard metal pads

    Blade guides with hard metal pads with adjusting screws to compensate the wear and tear.

     

    Roller tables RTS

    Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

    Roller Tables RTM

    Same structures of the RTS roller tables, to be used on the unloading side with length stop and metric rod for the reading of the length, mechanical block in position by handle.

    Roller Tables RTD

    Roller tables with free rolls and length stop through a hand-wheel with chain transmission and reading of the measure through LCD display. Automatic and pneumatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control. Turnover of the length stop with a button on the control, through pneumatic piston. Block in position is also pneumatic through a button.

    GBS 185
    Area angular cut ° 90 + 30
    Cutting capacity at 90°: round / square / rectangular mm. 185 / 180 / 200 x 150
    Blade dimensions mm. 2080 x 20 x 0.9
    Blade Motor Power KW 0,8
    Blade speed mt/min. 30/60
    Dimensions ( B x L x H ) mm. 600 x 1200 x 1700
    Height of Work-table mm. 900
    Weight Kg 205
    Type of functioning Manual
    Suitable for cutting: Steel / cast iron / aluminium

    Liitu nordcity.ee uudiskirjaga, et olla kursis meie värskete uudiste ja parimate pakkumistega!