BS 300 / 60 GH AUTOCUT

IMET BS 300/60 GH Autocut Manual Bandsaw

Manual Bandsaw for cuts from 0° up to 60° left of medium hardness material and medium productions.
Blade guard for a rapid and easy replacement of the blade.
Easy stops 0° 45° and graduated plate to identify different angles.
Blade guides with hard metal pads, additional bearing for blade alignment.
AUTOCUT GH Version equipped with main switch with padlock closure, minimum tension coil, for thermic & magnetic protection and motor absorption device.
“3 Ways” Selector:
– A Manual cut.
– B Self-brake manual cut.
– C Automatic cut with autonomous adjustable lowering and stopping microswitch at the end of the cut.
Cutting capacity: rounds till 255 mm., squares till 240 mm. and rectangular till 300×180 mm.


    Minimal lubrication system OPTIONAL

    It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.

    BS 300 inverter OPTIONAL

    If required, the electronic inverter for variable blade speed allows the operator via keyboard to adjust the machine to be able to cut a wide range of materials and different sections. The change of speed is via inverter and it does not affect the power of the engine even at low speeds.

    BS 300 GH Springs

    On all our bandsaws models BS 300,350,400 we mount a pair of springs for the perfect balance of the sawframe.


    Roller tables RTS

    Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

    Roller Tables RTM

    Same structures of the RTS roller tables, to be used on the unloading side with length stop and metric rod for the reading of the length, mechanical block in position by handle.

    Roller Tables RTD

    Roller tables with free rolls and length stop through a hand-wheel with chain transmission and reading of the measure through LCD display. Automatic and pneumatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control. Turnover of the length stop with a button on the control, through pneumatic piston. Block in position is also pneumatic through a button.

    Roller tables RTP BS.

    Roller tables with free rolls, length stop and motorized movement with possibility to plan 10 different lengths through PLC. Movement through toothed belt and geared motor on balls recirculation guides . Length stop through pneumatic cylinder. Reading of the position through encoder and rack. Available in forms from 3 meters. Automatic withdrawal of 50 mm to facilitate unloading of the cut piece, return in position through a button on the control.

    IMET BS 300 / 60 GH Autocut
    Area angular cut° 90 / +30
    Cutting capacity at 90°: round / square / rectangularmm.255 / 240 / 300 x 180
    Blade dimensionsmm.2765 x 27 x 0.9
    Blade Motor PowerKW1.5 / 1.8
    Blade speedRPM35/70
    Dimensions ( B x L x H )mm.900 x 1700 x 1860
    Height of the work-tablemm.940
    Type of functioningManual/Gravity
    Suitable for cutting:Steel / cast iron